Fixing A U140E That Won’t Reverse
During an overhaul of a U140E transmission, it was determined that the original valve body needed replacement. After installation the vehicle had no reverse engagement unless the selector lever was moved around. When drive was selected, a severe delayed engagement was present.
When the selector lever was moved one detent lower, engagement was immediate. When the technician compared the experienced valve body to the original, he noticed that the manual valves were different lengths (Figure 1). Upon further investigation, all U140E transmissions have the same length manual valve.
Figure 1
What had happened was, the experienced valve body had a U151E manual valve in it which is a different length than the U140E valve. The technician then put the manual valve from the original valve body into the used valve body and the transmission performed flawlessly. The dimensions for the U140E Manual Valve can be seen in Figures 2 and 3 and the U151E manual valve is shown in Figures 4 and 5.
Figure 2
Figure 3
Figure 4
Figure 5
If you wish to see the article in which we provided this information to, please click here.
We hope this was helpful to you. Make sure to comment below and share this info with others.